Tea Brewing Guide for Bowery Tea Glass Teapot

How to brew a perfect cup of tea

Shop Teapots

How to Brew Loose Leaf Tea - A Complete Guide

This brewing guide is designed for a single serving using 150 ml (5 oz) of water. For two people, simply increase the water to 300 ml (10 oz) and add an additional 1–2 grams of tea, while keeping the same water temperature and infusion times. This allows you to maintain the same balance, flavor profile, and extraction method when brewing a larger serving.

1. Measure the Tea

For 150 ml (5 oz) of water:

  • Use 3 - 5 grams of loose leaf tea
  • About 1 - 2 heaping teaspoons for most whole leaf teas

Our glass teapot has ample room for the loose leaves to extract more efficiently.

2. Heat Fresh Filtered Water

Use high quality filtered or bottled water.

Recommended temperatures:

Temperature directly affects sweetness, bitterness, and aroma of tea.

3. Preheat the Teapot (Recommended)

Add hot water to the empty glass teapot, swirl gently, discard the water.

This stabilizes brewing temperature and improves consistency.

4. Add Leaves Directly to the Teapot

Place the measured leaves directly into the glass pot.

5. Add 150 ml of Water

Pour evenly over the leaves, ensuring full saturation.
Start timing immediately.

Leaves will begin to unfurl and circulate naturally in the water.

6. Steep

  • White tea:      1 - 2 minutes
  • Green tea:      1 - 2 minutes
  • Oolong tea:   2 - 3 minutes
  • Black tea:       2 - 3 minutes
  • Pu’er tea:       2 - 3 minutes (see rinse note bellow)

If stronger flavor is desired, increase leaf amount slightly rather than extending steep time.

7. Pour Completely

When steeping is finished:

  • Pour all liquid out through the strainer lid into your cup.
  • Do not leave water sitting in the pot with the leaves.

Because the leaves remain inside the teapot, any remaining liquid will continue extracting and cause bitterness.

8. Re-Infusion

High-quality loose leaf tea can typically be steeped 2 - 4 times in 150 ml.

For additional infusions:

  • Use the same temperature.
  • Increase steep time by 30 - 60 seconds with each infusion.

Later infusions often highlight aroma and sweetness more than body.

Adjustment Guide

  • Too bitter → lower temperature or shorten steep time.
  • Too weak → increase leaf amount slightly.
  • Too astringent → pour more quickly and completely after steeping.

This loose-leaf-in-pot method allows full leaf expansion and produces a clean, balanced Western-style infusion.

Top of Form

 

Bottom of Form

Special Instructions for Pu’er Tea (Rinse Step)

For Pu’er tea (both raw/sheng and ripe/shou), a quick rinse is recommended before the first infusion.

How to Rinse:

  1. Place measured amount of Pu’er into the teapot.
  2. Add hot water (95 - 100°C / 205 - 212°F).
  3. Let steep for 5 - 10 seconds only.
  4. Pour out completely and discard this liquid.

This rinse:

  • Awakens and opens compressed leaves
  • Removes fine surface dust
  • Prepares the tea for fuller flavor extraction

After Rinsing:

  • Add fresh 150 ml hot water.
  • Steep for 2 - 3 minutes for the first proper infusion.
  • Pour completely.

Pu’er tea can typically be infused 3 - 5 times, increasing steep time slightly with each nfusion.

 

Back to blog